Brick Paver installation Colts Neck, NJ

 In Brick Paver installation Colts Neck, Marlboro Paver Walkway Patio Installation

Brick Paver installation Colts Neck, NJ Techo Bloc we design and install brick pavers. Driveways, Patio’s, Walkways, Landscaping and so much more. Call for a free estimate. 732-536-2221

People ask :

According to several paver manufacturers, paving blocks can be installed on top ofconcrete without mortar if you first lay down a 1/2″ to 1” bed of coarse sand. The process is nearly identical to laying a paver patio over ground. … Before you begin, make sure your concrete is properly sloped and doesn’t puddle
https://grinkevichlawnandlandscape.com
deep, and pack a 6-in. layer of gravel to form a flat base that slopes slightly for drainage. Set the patio stones and brick in a layer of sand and tamp them down so the surface is even. Fill the cracks with sand, tamp again, then landscape around the new patio and you’re done.
Can brick pavers be installed over an existing concrete or asphalt driveway, patio or walk? … The brick can be installed either with or without mortar. If no mortar is used, a half-inch setting bed of coarse sand should be laid and compacted
Polymeric sand is used to fill the joints between pavers, including concrete pavers, brick pavers, and stone pavers. This product is a fine sand combined with additives, usually silica, that, when mixed with water, form a binding agent.
Protect from rain for at least 12 hours. No sealer is required. Sand remaining on paver faces can create a slight haze after wetting. A minimum of 24 hours drying time is required prior to allowing significant foot traffic and 48 hours for vehicular traffic on the paver surface.

Grinkevich Lawn & Landscape has been creating residential landscaping… and only residential landscaping, for over 35 years.

Phone: (732) 536-2221
Fax: (732) 972-3238
Address: P.O. Box 50, Marlboro, NJ 07746
Email: info@grinkevichlawnandlandscapenj.com

NJHIC#13VH04779200

Recommended Posts